New York City Trash Chute | Free Shipping

If you're renovating a walk-up in the Bronx, stripping a brownstone in Brooklyn, or gutting a pre-war apartment on the Upper West Side, a New York City trash chute is the fastest, safest way to move debris from upper floors to a dumpster or container on the street below. EasyChute ships lightweight, woven coated-poly fabric chutes directly to your job site — anywhere in the five boroughs — with free shipping on every order.

NYC renovation sites come with constraints that most of the country never deals with: narrow sidewalks, rear yards barely wide enough for a wheelbarrow, shared fire escapes, strict neighbors, and buildings stacked four to seven stories without an elevator. EasyChute was designed by a remodeling contractor who knows exactly that situation. The chute hangs from a window frame, roof edge, or fire escape landing and guides debris straight down into a container — no outrigger frames, no rental crew, no heavy equipment blocking the block.

Trash chutes shipped free to New York City

Free shipping on every order. See the full shop.

EasyChute angled from a brick building's window into a roll-off dumpster

Why a Lightweight Fabric Chute Works on NYC Job Sites

Traditional rigid plastic or steel chutes are bulky, heavy to haul up a narrow staircase, and expensive to rent. EasyChute's woven, tear-resistant coated poly fabric folds down to almost nothing — a 10-foot section weighs under 3 pounds and fits in a drawer or small box. You carry the whole chute in a duffel bag up five flights of stairs and hang it in minutes.

On a Manhattan row house or a Queens attached home, you rarely have a wide-open back lot. The chute hangs vertically against the building face or down a rear yard alley, keeping debris contained and off the sidewalk. Sections connect loop-to-loop using carabiners or quick-connects, with a 1.5-foot overlap at every joint so dust and small particles stay inside the chute rather than raining down on pedestrians or parked cars below.

A standard 32-gallon commercial trash can with the bottom removed slides over the top of the chute and acts as a hopper. Workers on the upper floor toss drywall, plaster, roofing shingles, wood scraps, and insulation into the can — it feeds straight down into your dumpster. No bucket brigade, no repeated trips down four flights carrying heavy loads.

Choosing the Right Section Length for Your Building Height

New York City's building stock covers an enormous range of heights. Here's a straightforward guide to matching section length to your project:

10-foot section (≈ one story): The EasyChute Lite-Duty 10 ft Section ($99) or Heavy-Duty 10 ft Section ($149) is the right add-on unit when you need to extend an existing setup by one floor. On a two-story row house where the drop is only one story, a single 10-foot section may be all you need.
25-foot section (≈ two and a half stories): The EasyChute 25 ft Section ($277) covers most three-story Brooklyn brownstones or Bronx walk-ups in a single run. Under 8 pounds, it still fits in a standard gym bag.
50-foot section (≈ five stories): The EasyChute 50 ft Section ($596) handles a classic five- or six-story pre-war apartment building in one section. At under 15 pounds, two workers can carry it up the stairs without breaking a sweat. For taller buildings, combine sections using the loop-to-loop carabiner connection.

Middle shortening straps let you adjust the chute's working length so the bottom end sits right at dumpster height rather than dragging on the sidewalk. That matters when your container placement shifts or when you're working on a floor-by-floor gut renovation that moves up or down as the job progresses.

The OSHA 20-Foot Rule — What Every NYC Contractor Should Know

Federal OSHA regulation 29 CFR 1926.252(a) requires that when material is dropped more than 20 feet to any point outside the exterior walls of a building, an enclosed chute must be used. In New York City, where three- and four-story buildings are the baseline, that threshold is crossed on almost every exterior debris drop. EasyChute meets or exceeds applicable OSHA regulations, so using it keeps your crew compliant on inspected job sites.

Beyond federal rules, New York City has its own building and sidewalk-shed requirements. We ship chutes — we don't provide permitting advice — so always confirm site-specific compliance with the NYC Department of Buildings and your project's safety plan before you start work.

Staging a Dumpster or Container in NYC

Placing a roll-off dumpster on a New York City street almost always requires a permit from the city. Rules vary by borough and by block, and enforcement is active. Before you order your container, check with your local community board, the NYC DOT, and your dumpster hauler about what approvals you'll need and where placement is allowed. A rear yard or building-owned parking space, when available, can simplify things considerably — and the chute reaches there just as easily as to the street.

Once your container is in position, hang the chute from the roof parapet, a window frame, or a fire escape landing above the container's open top. The chute's bottom end should hang just inside or just above the container lip so debris lands inside and dust stays contained. For tight sidewalk setups in Manhattan or densely parked Brooklyn side streets, that contained-drop design matters a great deal to passersby and neighboring businesses.

Working Across All Five Boroughs

EasyChute ships free to job sites in every New York City borough. Whether you're doing a full gut renovation in a Bronx walk-up, replacing roofing on a Staten Island colonial, renovating a pre-war co-op in Manhattan, stripping a multi-family in Queens, or doing a full brownstone restoration in Brooklyn, the chute ships directly to your site address — no warehouse pickup, no freight broker to coordinate.

Need guidance on which section to order for a specific building type? See our brownstone window chute setup guide or the multi-unit debris chute page for Queens. You can also browse our FAQ for answers to common setup and ordering questions.

Reusable Job After Job — the NYC Math

Rental chutes add a line item to every project budget. EasyChute is a one-time purchase that comes back to the next job, and the job after that. Woven, tear-resistant coated poly fabric holds up to drywall chunks, broken plaster, bundled lath strips, and old roofing material. After the job, fold it back into its bag, toss it in the van, and it's ready for the next walkup.

For contractors running multiple crews across the boroughs, having a 50-foot section on each truck means no scheduling conflicts over shared rental gear and no return deadlines cutting your demo day short. See our full guide to cost-effective reusable chutes for NYC renovations for more detail on how that math works out across a season of projects.

Order Your New York City Trash Chute Today

Every EasyChute order ships free to any address in New York City — apartment building address, private home, or active job site. Orders are placed online at fixed prices, no quote needed. Reach us by phone at 855-902-4883 (Mon–Fri, 8 AM–10 PM Eastern) or by email at orders@easychute.com with any pre-order questions. Shop the full chute lineup and choose the section length that matches your building height.

Frequently asked questions

Does EasyChute ship to all five NYC boroughs?

Yes. EasyChute ships free to job sites in the Bronx, Brooklyn, Manhattan, Queens, and Staten Island. Ship directly to your site address — no local pickup is required. Orders are placed online at fixed prices.

Which section length should I order for a four-story Brooklyn brownstone?

A 25-foot section covers roughly two and a half stories, so for a four-story brownstone you'll want either a 50-foot section or a 25-foot section combined with a 10-foot section connected loop-to-loop. The 50-foot section at under 15 pounds handles most four- to five-story NYC walk-ups in one run.

Does the chute meet OSHA requirements for NYC construction sites?

EasyChute meets or exceeds applicable OSHA regulations, including 29 CFR 1926.252(a), which requires an enclosed chute when material is dropped more than 20 feet outside a building's exterior walls. For site-specific compliance, always verify requirements with your project's safety plan and the NYC Department of Buildings.

Do I need a permit to place a dumpster on a New York City street?

In most cases, yes — placing a container on a NYC street requires city approval, and rules vary by borough and block. We ship chutes; we don't provide permitting advice. Check with the NYC DOT, your local community board, and your dumpster hauler before placing a street container.

Can I hang an EasyChute from a NYC fire escape?

The chute is designed to hang from a window frame, roof edge, scaffold, or fire escape landing — no outrigger frames or rental hardware needed. Four woven connection loops at the top of each section attach to the anchor point. For any structural concerns about your specific fire escape, consult your building owner or a licensed engineer.

New York City Trash Chute for Contractors and Renovation Crews