If you're demoing a kitchen in a Greenpoint walk-up or stripping shingles off a rowhouse roof, you already know the challenge: narrow staircases, no freight elevator, a backyard barely wide enough to turn around in, and a landlord or neighbor watching every move. A trash chute in Greenpoint lets you send drywall, plaster, old roofing, and wood scraps straight from the work floor to a dumpster below — without wheelbarrows, bucket brigades, or damage to the walls on the way down. EasyChute ships its lightweight, woven coated-poly fabric debris chutes free to job sites anywhere in Brooklyn, including right here in Greenpoint.
This page walks you through which EasyChute section fits your building, how to hang it from a window or roof edge without renting equipment, and how to order online at a fixed price today.
Trash chutes shipped free to Greenpoint
Free shipping on every order. See the full shop.

Why Greenpoint Renovations Need a Debris Chute
Greenpoint is one of Brooklyn's most distinctive neighborhoods — a dense mix of Polish and Latin heritage, a growing creative scene, and block after block of late 19th- and early 20th-century rowhouses, three-story wood-frames, and low-rise brick apartment buildings. Most of these structures were built before elevators were standard. That means contractors working in Greenpoint are almost always carrying debris down tight interior stairs or wrestling it through narrow rear yards shared by multiple buildings.
Fire escapes run along the fronts and sides of many Greenpoint buildings. While they are not designed as work platforms, they provide a natural anchor point for a debris chute when you hang it from a window ledge above them — keeping the chute clear of foot traffic and pointed toward a dumpster parked at the curb or in the alley. A chute also keeps debris contained: no loose shingles or plaster chunks raining down on a sidewalk, and no cloud of drywall dust drifting toward a neighbor's open window.
OSHA and Enclosed Chutes: What Greenpoint Contractors Should Know
OSHA 29 CFR 1926.252(a) requires an enclosed chute whenever material is dropped more than 20 feet outside the exterior walls of a building. In a three-story Greenpoint rowhouse, that threshold can come up quickly once you factor in the height of a second- or third-floor window. EasyChute meets or exceeds applicable OSHA regulations, and every section overlaps the next by 1.5 feet at each joint, so debris stays inside the chute from top to bottom. Always check with the NYC Department of Buildings and your local building department regarding any permit or safety requirements specific to your project before you start work.
Choosing the Right EasyChute Section for Your Building
Every Greenpoint job is a little different, but here's a practical guide:
- Two- or three-story rowhouse (roughly 20–30 ft to the dumpster): The EasyChute 25 ft Section — $277 covers about two and a half stories and is the most popular choice for Greenpoint walk-ups. It weighs under 8 lbs and folds down small enough to carry up on your first trip.
- Single-story addition, garage, or lower-floor demo: One or two EasyChute Lite-Duty 10 ft Sections at $99 each handle lighter debris loads from lower heights. Each section approximates one story and weighs under 3 lbs — it fits in a large toolbox drawer.
- Heavier loads — roofing shingles, plaster and lath, mixed demo debris: Step up to the EasyChute Heavy-Duty 10 ft Section at $149, built from the same coated poly fabric but rated for heavier, coarser material. Stack two sections with carabiners to reach a second-floor window.
- Taller buildings — four or five stories: The EasyChute 50 ft Section — $596 covers roughly five stories (under 15 lbs) and ships free to your Greenpoint address. You can also combine a 25 ft and a 10 ft section using the loop-to-loop carabiner connection if your drop falls between sizes.
All sections share the same 22-inch diameter and the same four-loop connection system at top and bottom. Mix and match sections job to job — you're not locked into a rental contract or a single configuration.
How to Hang a Trash Chute on a Greenpoint Rowhouse
No outriggers, no rented hoisting frame, no extra crew. Here's the basic setup for a typical Greenpoint three-story job:
- Set up a hopper at the top. Remove the bottom from a standard 32-gallon commercial trash can and set it in the window opening. This funnels debris into the chute opening and keeps dust from blowing back into the room.
- Hang the chute from the window frame or sill. Thread the top connection loops around a sturdy anchor point — a scaffold plank, a robust window frame, or a beam — and carabiner them in place. The 1.5-foot joint overlap keeps everything sealed.
- Run it to the dumpster. Let the chute hang straight down the building face to your dumpster or debris box below. Greenpoint rowhouses typically have stoops with a few steps, so position the dumpster as close to the building as curb regulations allow. Check NYC DOT rules on dumpster placement before you park the bin.
- Adjust length with the middle shortening straps. If the chute is longer than your drop, use the built-in shortening straps to take up the slack and keep it taut against the building face.
Saving Trips, Saving Your Crew
A debris chute is not just a convenience — it's a labor calculation. Every trip a worker makes down a narrow Greenpoint staircase with a bag of plaster or a bundle of shingles is time that isn't going into the renovation itself. A chute running continuously from the demo floor to the dumpster can cut the number of those trips dramatically. The chute also moves debris faster than a bucket brigade and without the back-and-shoulder strain of carrying heavy loads down steep stairs.
Because EasyChute sections are reusable job after job, the cost per use drops steadily. A reusable debris chute pays for itself quickly on NYC renovations where labor rates are high and every hour on site counts. You can read more about Brooklyn-wide applications on our Brooklyn trash chute overview page, or see how contractors handle similar walk-up challenges in Bushwick and Park Slope.
Free Shipping to Greenpoint — Order Online Today
EasyChute ships every order free to job sites anywhere in the United States — including directly to your Greenpoint address or the building you're working in. There are no local branches or installers; we manufacture in Massachusetts and ship to you. Order online at a fixed price, no quotes or negotiations needed.
Browse all available sections in the EasyChute shop, or call us Monday through Friday, 8 AM–10 PM Eastern at 855-902-4883 if you have questions about sizing. You can also email orders@easychute.com or visit our FAQ page for quick answers. If you need help thinking through a specific building configuration, reach out through our contact page.
Working on a brownstone-style building and want to see how window hanging works in detail? Check out our guide to brownstone window debris chutes in Brooklyn. And if your project spans multiple units or floors, the tips on our multi-unit debris chute page apply just as well to Greenpoint's denser apartment stock.
Frequently asked questions
Does EasyChute ship free to Greenpoint, Brooklyn?
Yes. Every EasyChute order ships free to job sites anywhere in the United States, including Greenpoint and all of Brooklyn. There are no hidden freight charges at checkout.
Which section size works best for a three-story Greenpoint rowhouse?
For most three-story rowhouses, the 25 ft section ($277) is the best fit — it covers about two and a half stories and weighs under 8 lbs. If your drop is closer to two full stories, a pair of 10 ft sections connected with carabiners also works well and gives you flexibility on future jobs.
Can I hang the chute from a fire escape or window without renting scaffolding?
EasyChute is designed to hang from a window frame, roof edge, or scaffold without outriggers or a rental frame. For most Greenpoint walk-ups, anchoring the top loops around a solid window frame or sill and funneling debris through a hopper (a 32-gallon trash can with the bottom removed) is all the setup you need.
Is there an OSHA requirement to use an enclosed chute in Greenpoint?
OSHA 29 CFR 1926.252(a) requires an enclosed chute whenever material is dropped more than 20 feet outside a building's exterior walls. EasyChute meets or exceeds applicable OSHA regulations, and its 1.5-foot overlapping joints keep debris fully contained between sections. Always confirm any local permit or safety requirements with the NYC Department of Buildings before starting your project.
Can the same chute sections be reused on multiple Greenpoint jobs?
Absolutely. EasyChute sections are built from durable, tear-resistant woven coated poly fabric specifically to be reused job after job. After your Greenpoint renovation wraps up, fold the section down — a 10 ft section fits in a drawer or small box — and bring it to your next site.
Nearby
Related guides
- Brownstone Window Debris Chute Brooklyn: Setup, Permits & Safety Guide for 2026
- Cost-Effective Reusable Trash Chute for NYC Renovation Projects (Contractors)
- Long Island Contractor Guide to Debris Chutes for Split-Level Homes
- Queens Multi-Unit Renovation Debris Control Plan (Window Loading + Zone Control)



