Trash Chute for DUMBO, Brooklyn Renovations

If you're managing a renovation in DUMBO — Down Under the Manhattan Bridge Overpass — you already know the neighborhood doesn't give much room to maneuver. Converted warehouses, cast-iron loft buildings, and cobblestone streets mean tight staging areas, limited curb access, and debris that needs to travel several stories to a dumpster below. A trash chute for DUMBO jobs is the clean, practical answer: hang it from a window or roofline, connect sections as you go, and let gravity do the heavy lifting while your crew stays focused on the work.

EasyChute ships its lightweight, woven coated poly debris chutes free to job sites anywhere in the United States — including right to your DUMBO address. Made in Massachusetts, sold at fixed prices online, and built to be reused job after job, EasyChute is the no-rental, no-crew, no-fuss solution for Brooklyn contractors, property managers, and homeowners tackling gut renovations, roofing work, or floor-by-floor build-outs in one of Brooklyn's most demanding neighborhoods.

Trash chutes shipped free to DUMBO

Free shipping on every order. See the full shop.

An orange EasyChute trash chute hanging from a brownstone renovation in New York City

Why DUMBO Renovations Need a Proper Debris Chute

DUMBO's building stock is unlike almost anywhere else in Brooklyn. The neighborhood built its identity on massive 19th- and early 20th-century industrial loft buildings — brick, heavy timber, and concrete — that have been converted into condos, offices, galleries, and boutique hotels. Many are five, six, or seven stories tall with large floor plates and open layouts. Gutting one of these spaces generates enormous volumes of debris: plaster, concrete block, old hardwood flooring, drywall, insulation, and roofing material.

At street level, DUMBO's historic cobblestone blocks and proximity to the Brooklyn Bridge Park mean truck access and dumpster placement can be genuinely constrained. You can't always park a roll-off right at the building entrance. Moving debris by hand — bucket brigade, cart, stair dolly — is slow, physically punishing, and a safety risk when you're doing it across multiple floors. A debris chute lets you drop material directly from the work floor into a contained waste stream at ground level, keeping your crew on task and your site cleaner.

How EasyChute Handles DUMBO's Tall Loft Buildings

EasyChute sections come in three lengths designed to cover the heights you'll actually encounter in DUMBO:

  • 10 ft section — roughly one story. Stack them with carabiners or quick-connects for any height you need.
  • 25 ft section — covers about two and a half stories in a single piece, ideal for a mid-floor renovation in a converted loft.
  • 50 ft section — spans approximately five stories, built for full-building gut jobs or rooftop tear-offs on DUMBO's taller structures.

Every joint overlaps 1.5 feet and the sections connect loop-to-loop, so dust and debris stay inside the chute rather than drifting onto the cobblestones — or onto a neighbor's parked car. Middle shortening straps let you fine-tune the total length so the chute mouth sits right where you need it at the bottom.

The chute hangs from a window frame, roof edge, scaffold pipe, or fire escape. No outriggers. No rented hoist frame. No special crew to set it up. One worker can rig a section in minutes.

Setting Up a Hopper on a DUMBO Loft Floor

At the top of the chute, a standard 32-gallon commercial trash can with the bottom cut out makes a ready-made hopper. Set it in the window opening, drop the chute's top loops over a secure anchor point, and your crew has a debris funnel they can shovel or sweep directly into. On a wide open loft floor, this setup keeps the work flowing without stop-and-start trips to the stairs.

Because EasyChute sections weigh almost nothing — the 10 ft section is under 3 lbs, the 25 ft under 8 lbs, the 50 ft under 15 lbs — moving the rig to a different floor or a different window bay takes minutes, not a half-day of labor. When the job is done, the chute folds down small enough to store in a job-box or the back of a van, ready for the next site.

OSHA Compliance on Multi-Story DUMBO Jobs

OSHA regulation 29 CFR 1926.252(a) requires an enclosed chute when material is dropped more than 20 feet to any point outside a building's exterior walls. On a four-, five-, or six-story DUMBO loft job, that threshold is crossed quickly. EasyChute meets or exceeds applicable OSHA regulations, so you're covered. If your project involves permits or site safety plans, check with the New York City Department of Buildings and your site safety manager for any additional local requirements.

Choose the Right EasyChute Section for Your Job

Pick your section length based on how many floors of drop you're working with:

Not sure which length fits your project? The FAQ page walks through sizing in plain terms, or call us at 855-902-4883, Monday through Friday, 8 AM to 10 PM Eastern.

Free Shipping to Your DUMBO Job Site

Every EasyChute order ships free anywhere in the United States. We ship to job sites across Brooklyn — DUMBO, Vinegar Hill, the waterfront, wherever the work is. There's nothing to rent, no deposit to leave, and no crew to schedule. Order online, receive the chute, hang it, use it, and pack it away. It's that straightforward.

Browse the full product line at the EasyChute shop, or read more about debris chute strategies for Brooklyn renovations on our Brooklyn trash chute page and our brownstone window debris chute guide. Working in other Brooklyn neighborhoods? See our pages for Park Slope, Bushwick, and Greenpoint as well.

Frequently asked questions

Can I use an EasyChute on a converted loft building in DUMBO?

Yes. EasyChute sections are designed for multi-story buildings of any type, including the tall brick loft conversions common in DUMBO. Choose a 25 ft or 50 ft section for taller drops, or stack 10 ft sections using the loop-to-loop connection system. The chute hangs from a window frame, roof edge, or scaffold pipe — no special frame or rental equipment needed.

Does EasyChute really ship free to Brooklyn?

Yes — every order ships free to any address in the United States, including job sites in DUMBO and throughout Brooklyn. There are no hidden freight charges or minimum order requirements. Prices are fixed and listed on the product pages.

How do I anchor the chute on a DUMBO building with limited window space?

The four woven connection loops at the top of each section attach to any solid anchor point — a window frame, roof parapet, scaffold pipe, or fire escape railing. No outriggers or external frame are required. The setup is lightweight enough that one worker can rig the chute without additional help.

Will EasyChute handle heavy demo debris from older DUMBO buildings?

The heavy-duty 10 ft section and the 25 ft and 50 ft sections are built for common construction debris including plaster, concrete block fragments, old hardwood flooring, roofing shingles, and insulation. The fabric is woven and coated poly, rated tear-resistant for job-site use. For the densest materials, use the heavy-duty section or take care not to overload the chute at one time.

Does using an EasyChute satisfy the OSHA requirement for enclosed chutes on tall buildings?

EasyChute meets or exceeds applicable OSHA regulations, including 29 CFR 1926.252(a), which requires an enclosed chute when debris is dropped more than 20 feet outside a building's exterior walls. For NYC-specific permit and site safety requirements on your DUMBO project, check with the New York City Department of Buildings and your site safety professional.

Nearby

Related guides

Frequently Asked Questions

What is an EasyChute?

EasyChute is a lightweight construction trash chute made from woven, coated poly fabric. You hang it from a window, roof edge or scaffold and drop debris straight into the dumpster below instead of carrying it down stairs. Sections come in 10, 25 and 50 ft lengths and connect to reach any height.

How much does an EasyChute cost?

The 10 ft lite-duty section is $99, the 10 ft heavy-duty section is $149, the 25 ft section is $277 and the 50 ft section is $596. Prices are fixed and shipping is free — you pay what you see in the cart.

How many sections do I need?

Measure from where the debris goes in (the window sill, roof edge or scaffold deck) down to the top of the dumpster. Each connection overlaps 1.5 ft, so every extra section adds its length minus 1.5 ft. As a rule of thumb, a 10 ft section covers about one story, the 25 ft section about two and a half and the 50 ft section about five.

How do I hang an EasyChute?

Each section has four woven connection loops at the top and four at the bottom — two in front, two in back. Clip the top loops to a secure anchor with carabiners or quick-connects, clip the next section's top loops to the bottom loops of the one above, and let the bottom hang into the dumpster. Middle shortening straps let you take up slack for an exact fit. No outriggers, frames or hoists are needed.

Can I use a trash can as a hopper?

Yes. Cut the bottom out of a standard 32-gallon commercial trash can and seat it in the top of the chute. It makes a wide, sturdy mouth that wheelbarrows and buckets can tip straight into.

See all FAQs →

Ready to work with EasyChute?

Reach out to EasyChute — we'll get back to you fast.

© 2026 EasyChute. All rights reserved.

Privacy Policy·Terms of Service

Powered by On Demand Marketing