Whether you're stripping shingles off a rowhouse in Baltimore, gutting a colonial in Annapolis, or renovating a mid-rise in Bethesda, a trash chute Maryland crews can rely on makes debris removal faster and safer. EasyChute's lightweight, woven coated-poly fabric chutes drop drywall, plaster, roofing material, and wood scraps straight into a dumpster below — no outriggers, no rental crew, no hassle.
We manufacture these chutes in Massachusetts and ship every order free to job sites anywhere in Maryland, from the Eastern Shore to the western mountains. You order online at fixed prices, and the chute arrives ready to hang from a window, roof edge, scaffold, or fire escape. This page walks you through which sections fit Maryland's most common building heights, how to stay OSHA-compliant, and how to get set up in minutes on your next job.
Trash chutes shipped free to Maryland
Free shipping on every order. See the full shop.
Why Maryland Contractors Choose a Fabric Trash Chute
Maryland's building stock is one of the most varied on the East Coast. Baltimore alone is packed with late-19th and early-20th century rowhouses — two and three stories of brick, plaster, and lath that generate mountains of demolition debris the moment a gut-rehab starts. The suburbs of Washington, D.C. — Silver Spring, Rockville, College Park — are full of postwar ranches and colonials getting addition work and kitchen tear-outs. Ocean City has a steady stream of older resort properties being renovated floor by floor. And the state's older mill towns and waterfront communities constantly cycle through commercial-to-residential conversions.
All of those projects share one problem: how do you get debris from an upper floor to a dumpster on the street without carrying it down three flights of stairs or pitching it out a window into a pile? A fabric construction chute solves that cleanly. It hangs vertically from the work level, channels debris straight down, and keeps dust and chunks contained the whole way. Your crew saves time, your dumpster stays where you aimed it, and passersby don't dodge falling material.
Choosing the Right Trash Chute Sections for Maryland Buildings
EasyChute sections are sized so one 10-foot section covers roughly one story. That simple rule covers almost every building type you'll encounter across the state.
- One- and two-story work (ranches, roofing jobs, additions): A single EasyChute Lite-Duty 10 ft section ($99) handles roofing tear-offs on a typical ranch or a second-floor gut job. For heavier material — thick plaster, old slate shingles, dense hardwood flooring — step up to the Heavy-Duty 10 ft section ($149).
- Two-and-a-half to three-story rowhouses and colonials: Baltimore's classic three-story rowhouse is the signature building type of Maryland construction work. A 25 ft section ($277) spans that height in one piece, with no mid-run connections to fuss with. It arrives under 8 lbs and folds small enough to fit in a truck bed bag.
- Four- to five-story mid-rise and commercial buildings: Bethesda, Rockville, and downtown Annapolis have plenty of older four- and five-story structures undergoing interior renovation or re-roofing. The 50 ft section ($596) reaches five full stories and weighs under 15 lbs — one person can carry it up a stairwell without breaking a sweat.
- Taller structures or extra reach: Sections connect loop-to-loop using carabiners or quick-connects. Every joint overlaps 1.5 feet to keep debris and dust inside the chute. Middle shortening straps let you dial in the exact drop length so the chute mouth sits right at your dumpster.
Not sure which combination fits your job? Check the FAQ page or call us at 855-902-4883, Monday through Friday, 8 AM to 10 PM Eastern.
The OSHA 20-Foot Rule Every Maryland Crew Should Know
OSHA 29 CFR 1926.252(a) is straightforward: when material is dropped more than 20 feet to any point outside the exterior walls of a building, an enclosed chute must be used. On a Baltimore rowhouse or an Annapolis colonial, that threshold can arrive sooner than crews expect — especially when the dumpster sits at street level and the roof edge is 30 or 35 feet up. EasyChute meets or exceeds applicable OSHA regulations, so you can hang a section, get debris moving, and check that box with confidence. If you have questions about how a specific site or project type interacts with local requirements, check with your local building department.
Working Through Maryland's Climate
Maryland's weather runs the full range. Summers on the Chesapeake can be hot and humid; winters in the western counties bring real cold and occasional snow. Fall and spring — the busiest renovation seasons in most of the state — deliver everything from dry, clear days to nor'easters blowing off the Atlantic. EasyChute's woven, coated poly fabric is tear-resistant and built to take job-site abuse. Secure the chute firmly at the top connection loops whenever wind picks up, and bring it down during any severe weather. Because it folds small and weighs so little, packing it away at the end of the day takes about 30 seconds.
Setting Up Your EasyChute on a Maryland Job Site
Setup is fast enough that one person can do it alone before the rest of the crew arrives. Here's the basic walkthrough:
- Choose your hang point. A window frame, roof edge, scaffold rail, or fire escape all work. You need something solid that the four woven top loops can anchor to securely.
- Attach the top loops. Run rope, zip ties, or a dedicated strap through the two front and two back loops at the top of the chute and tie off to your anchor. The chute should hang plumb.
- Make a hopper (optional but recommended). A standard 32-gallon commercial trash can with its bottom cut out drops over the top of the chute and gives your crew a wide, stable target to throw debris into. It also keeps dust from billowing back up.
- Connect additional sections if needed. Align the bottom loops of the upper section with the top loops of the next section and clip them together with carabiners. The 1.5-foot overlap at each joint keeps material inside.
- Adjust the drop length. Use the middle shortening straps to position the bottom mouth of the chute directly over your dumpster opening.
- Start dropping debris. Feed material steadily — don't overload the chute all at once — and check connections at each shift.
See the full step-by-step in our Baltimore demolition debris chute workflow guide, which walks through a typical rowhouse gut-rehab from setup to teardown.
Free Shipping to Maryland Job Sites
Every EasyChute order ships free to any address in Maryland — a rowhouse in West Baltimore, a job trailer in Rockville, a rental property on the Eastern Shore, a commercial site in Frederick. There are no minimum orders and no surcharges for remote locations. Order directly from the EasyChute shop, and if you have questions before you order, reach us at orders@easychute.com or by phone at 855-902-4883 (Mon–Fri, 8 AM–10 PM Eastern).
Reusable job after job, light enough to carry up any stairwell, and sized to fit Maryland's most common building heights — a fabric trash chute is one of the simplest upgrades a Maryland contractor or property manager can make to their debris-removal workflow. Shop chutes now and get your next job site set up right.
Frequently asked questions
Does EasyChute ship trash chutes to Maryland job sites?
Yes — we ship free to any address in Maryland, including job sites, rental properties, and storage yards. There are no shipping fees and no minimum order. Order online at EasyChute.com or call 855-902-4883.
What size chute works best for a Baltimore rowhouse?
Most Baltimore rowhouses are three stories, so the 25 ft section is the go-to choice — it covers that full height in one piece with no mid-run connections. For heavier demo material like old plaster or slate shingles, consider the Heavy-Duty 10 ft sections if you're stacking multiple sections on a taller building.
When does OSHA require an enclosed chute on a Maryland job site?
Under OSHA 29 CFR 1926.252(a), an enclosed chute must be used whenever material is dropped more than 20 feet to any point outside the exterior walls of a building. On a typical three- or four-story Maryland structure, that threshold is often exceeded. EasyChute meets or exceeds applicable OSHA regulations. For site-specific questions, check with your local building department.
Can one person set up an EasyChute on a Maryland job site?
Yes. The chute is lightweight — the 25 ft section weighs under 8 lbs — and hangs directly from a window frame, roof edge, scaffold, or fire escape using the four woven loops at the top. No outriggers, frames, or rental crew are needed. Most solo setups take just a few minutes.
Can I connect multiple EasyChute sections for a taller Maryland building?
Absolutely. Sections link together loop-to-loop using carabiners or quick-connects, with a 1.5-foot overlap at each joint to keep debris and dust contained inside the chute. The middle shortening straps let you fine-tune the total drop length to land right at your dumpster.