When you're running a renovation in Concourse, the Bronx, getting debris off the upper floors of a six-story walk-up or a prewar apartment building is one of the first problems you solve — and it shapes everything else on the schedule. A trash chute for Concourse, Bronx job sites needs to work with the neighborhood's tight lots, narrow rear yards, and buildings that weren't designed with a loading dock in mind. EasyChute ships a lightweight, reusable debris chute directly to your job site anywhere in the Bronx, free of charge, so you can get set up without renting equipment or waiting on a local supplier.
EasyChute is made from woven, coated poly fabric, weighs under 15 lbs even in the 50-foot section, and folds down small enough to carry up a stairwell by hand. There are no frames, outriggers, or rental crews involved — you hang it from a window sill, roof parapet, fire escape, or scaffold with the four woven connection loops built into every section. For Concourse contractors working on dense residential blocks with little room to maneuver a dumpster truck, that kind of simplicity matters.
Trash chutes shipped free to Concourse
Free shipping on every order. See the full shop.
Why Concourse Renovations Need a Reliable Debris Chute
The Grand Concourse corridor is lined with some of the most architecturally distinctive prewar apartment buildings in New York City — many of them five, six, or seven stories tall, built in the Art Deco era, with ornate lobbies, narrow side passages, and interiors full of plaster, lath, and original hardwood. When a contractor guts a unit on the fifth floor of one of these buildings, the debris has to go somewhere, and carrying it down four flights of stairs bag by bag is the slow, expensive way to do it.
A fabric debris chute solves that problem without creating new ones. You hang the chute from the window of the work floor, direct demolition material into the top opening, and it lands in a standard 32-gallon commercial trash can with the bottom removed — placed at grade level in the rear yard, on the sidewalk, or directly over a dumpster. No heavy steel scaffolding. No motorized lift. No blocking the stairwell with debris runs all afternoon.
Concourse also has a large stock of six-story walk-ups along the side streets off the Grand Concourse itself, plus scattered mid-rise co-ops and rental buildings that are actively turning over units for renovation as new owners and property managers invest in upgrades. Roofers working on the flat roofs that are common on Bronx apartment buildings will find the chute equally useful for shingle tear-offs and insulation removal — materials that are bulky, heavy, and messy to carry.
Choosing the Right Trash Chute Section for Your Concourse Job
EasyChute sections are sized to match the height of the building you're working on. Here's how to match section length to story count:
- 10-foot section (~one story): Useful as an add-on at the top or bottom of a longer run, or for a single-story addition or dormer project. Available in Lite-Duty ($99) and Heavy-Duty ($149).
- 25-foot section (~two and a half stories): A good fit for three-story brownstones or the lower floors of a mid-rise. The EasyChute 25 ft Section is $277 and weighs under 8 lbs.
- 50-foot section (~five stories): The right choice for the six- and seven-story prewar buildings that define Concourse. The EasyChute 50 ft Section is $596 and still weighs under 15 lbs — one person can carry it up the stairs.
Sections connect loop-to-loop using carabiners or quick-connects, with a 1.5-foot overlap at every joint to keep dust and debris from escaping between sections. If your run is longer than a single section covers, you can link multiple sections together. Middle shortening straps let you fine-tune the length without cutting or modifying anything.
Setting Up a Trash Chute on a Concourse Walk-Up
Setup on a typical Concourse apartment building follows a straightforward sequence:
- Position your container. Place a standard 32-gallon commercial trash can with the bottom removed at grade level directly below the window you're using, or set it over your dumpster opening.
- Hang the top section. Attach the four woven loops at the top of the chute to the window frame, fire escape, or roof parapet using carabiners or quick-connects — whatever gives you a secure anchor point on that particular building.
- Add sections as needed. If you're working on the fifth or sixth floor, connect additional sections loop-to-loop, letting the chute drop toward grade with the 1.5-foot overlaps keeping the joints tight.
- Feed debris in from above. Drywall, plaster, lath, roofing shingles, insulation, and wood scraps all move through the 22-inch diameter opening. Work your way through the demo while material drops directly into the container below.
- Adjust length with the shortening straps. If the bottom of the chute is sitting on the ground or hitting the container at an awkward angle, the middle shortening straps let you pull it up to the right height without repositioning the whole system.
When the job is done, the chute folds back down to a compact bundle — a 10-foot section fits in a drawer or small box — and goes into your truck for the next job. EasyChute is reusable job after job, which makes it one of the more cost-effective tools in a renovation contractor's kit. See more about reusable trash chutes for NYC renovations.
OSHA Compliance for High-Rise Debris Drops in the Bronx
OSHA 29 CFR 1926.252(a) requires that when material is dropped more than 20 feet to any point outside the exterior walls of a building, an enclosed chute must be used. In a six-story Concourse building, that threshold is cleared easily — you're typically dropping debris from 50 to 65 feet. EasyChute meets or exceeds the applicable OSHA regulations for enclosed chutes, so using it on a Concourse job site keeps you on the right side of that requirement. If your project involves a permit that specifies additional safety measures, check directly with the New York City Department of Buildings or the relevant borough office for current requirements.
Free Shipping to Concourse and Every Bronx Neighborhood
EasyChute ships to job sites across the Bronx at no additional charge — no delivery fee, no freight surcharge, no minimum order. Whether you're on Jerome Avenue, the Grand Concourse itself, or a side street off 161st, we ship directly to the address you provide at checkout. Orders are placed online at fixed prices, and you can reach us by phone at 855-902-4883 (Mon–Fri, 8 AM–10 PM Eastern) or by email at orders@easychute.com if you have questions before ordering.
Working in other parts of the Bronx? See our pages for the Bronx overall, Bedford Park, Morris Park, Riverdale, and Co-op City. Also working in Queens? See multi-unit debris chutes for Queens.
Ready to order? Browse all EasyChute sections in our shop and choose the section length that fits your building. Free shipping to Concourse, the Bronx — every order.
Frequently asked questions
Which EasyChute section fits a six-story prewar building in Concourse?
The 50-foot section is the right starting point for a five- to six-story building — it covers approximately five stories and weighs under 15 lbs. If you're working above the sixth floor, you can connect a 10-foot section to extend the run using carabiners or quick-connects. The 1.5-foot overlap at every joint keeps the connection tight and dust-contained.
Can I hang an EasyChute from a fire escape on a Concourse apartment building?
Yes — the four woven connection loops at the top of every section are designed to attach to a window frame, fire escape railing, roof parapet, or scaffold using carabiners or quick-connects. Make sure the anchor point can support the load of the chute and the debris moving through it. If you have questions about safe rigging on a specific structure, consult your site foreman or a qualified rigger.
Does EasyChute really ship free to the Bronx?
Yes. Every EasyChute order ships free to any address in the United States, including job sites anywhere in the Bronx. There's no delivery surcharge, no minimum order requirement, and no freight fee added at checkout. You pay the listed product price and nothing more for shipping.
Is EasyChute OSHA-compliant for debris drops in New York City buildings?
EasyChute meets or exceeds the applicable OSHA regulations for enclosed debris chutes, including OSHA 29 CFR 1926.252(a), which requires an enclosed chute for any material dropped more than 20 feet outside the exterior walls of a building. For NYC-specific permit or safety requirements, check with the New York City Department of Buildings or your borough office.
What types of debris can I run through an EasyChute on a Concourse renovation?
EasyChute is built for common construction and renovation debris — drywall, plaster and lath, roofing shingles, wood scraps, and insulation. The 22-inch diameter opening handles bulky demo material, and the tear-resistant woven, coated poly fabric holds up to the wear of job-site use. For heavy roofing debris or sharp materials, the Heavy-Duty 10 ft section is the stronger option.
Nearby
Related guides
- Brownstone Window Debris Chute Brooklyn: Setup, Permits & Safety Guide for 2026
- Cost-Effective Reusable Trash Chute for NYC Renovation Projects (Contractors)
- Long Island Contractor Guide to Debris Chutes for Split-Level Homes
- Queens Multi-Unit Renovation Debris Control Plan (Window Loading + Zone Control)