Trash Chute Co-op City | Free Shipping

If you're managing a renovation in Co-op City, you already know the logistics don't work like a typical suburban job site. This sprawling residential community in the northeastern Bronx is home to some of the tallest residential towers in New York City — multi-story high-rises where hauling debris down stairwells is slow, dangerous, and expensive. A trash chute co-op city contractors can rely on solves that problem fast: hang it from a window or balcony railing, connect your sections, and drop debris straight into a dumpster below without a single trip up and down the stairs.

EasyChute makes and sells a fabric debris chute built specifically for jobs like these. It's made of woven, coated poly fabric, weighs under 15 lbs for a full 50 ft section, and ships free to job sites anywhere in the United States — including Co-op City. No freight broker, no rental crew, no outrigger frame. You order online, it arrives at your site, and you're set up in minutes.

Trash chutes shipped free to Co-op City

Free shipping on every order. See the full shop.

Roofers using EasyChute to drop shingles into a dumpster in Dorchester, Boston

Why Co-op City Renovations Call for a Debris Chute

Co-op City is defined by its high-rise residential towers — buildings that rise many stories above ground level and house thousands of residents. When a unit gets renovated — new drywall, flooring, kitchen demo, bathroom gut — the debris has to go somewhere. Carrying it by hand through crowded corridors and down packed elevator banks is a logistical nightmare, and it creates real hazards for other residents passing through.

A construction trash chute changes the equation. You hang the chute from a window on the unit's floor, run it straight down to a dumpster or trash can positioned at grade, and debris travels in an enclosed column — no dust clouds in the hallway, no debris raining down on anyone below. That enclosed design also keeps EasyChute compliant with OSHA 29 CFR 1926.252(a), which requires an enclosed chute whenever material is dropped more than 20 feet outside the exterior walls of a building.

High-rise towers in Co-op City can easily put a renovation unit 60, 80, or more feet above the ground. That's not a job for an open drop or a window toss. It's a job for a properly sized chute.

Choosing the Right Trash Chute Section for a Co-op City High-Rise

EasyChute sections come in three lengths, and you can connect as many as you need using the built-in woven loops and carabiners (or quick-connects). Every joint overlaps 1.5 feet to keep dust and debris contained inside the system.

10 ft Section (~one story): Good for adding a single story of reach, filling gaps, or lower-floor units. Available in Lite-Duty ($99) and Heavy-Duty ($149).
25 ft Section (~two and a half stories): A practical starting point for mid-rise access. The 25 ft section is $277.
50 ft Section (~five stories): The workhorse for Co-op City's towers. Two of these get you to a tenth-floor unit; three cover a fifteenth floor and beyond. The 50 ft section is $596.

Sections connect loop-to-loop, so you build the exact length your job requires. Middle shortening straps let you fine-tune the hang. And because every section folds down small — a 10 ft section fits in a drawer — storing and transporting the system in a high-rise building is genuinely easy.

Setting Up an EasyChute in a High-Rise Unit

The setup process doesn't require a special crew or rented equipment. Here's how it typically goes on a Co-op City tower job:

Position your container. A standard 32-gallon commercial trash can with its bottom removed works as a hopper at the top of the chute. Set it at the window opening of the unit being renovated.
Anchor the top section. Use the four woven loops at the top of the first section to tie off to the window frame, a scaffold plank, or another secure anchor point. No outriggers or frames needed.
Connect sections downward. Add 50 ft sections one at a time, connecting loop-to-loop with carabiners. Every connection overlaps 1.5 ft automatically.
Guide the bottom into your dumpster. Make sure the bottom of the chute drops into the dumpster or collection bin below so debris doesn't scatter.
Load from the top. Demo material — drywall, plaster, old flooring, roofing scraps, insulation — goes in the hopper and rides straight down.

When the job is done, disconnect the sections, fold them up, and store them for the next project. EasyChute is reusable job after job.

OSHA Compliance in Co-op City High-Rise Work

OSHA 29 CFR 1926.252(a) is clear: if you're dropping construction debris more than 20 feet to any point outside the building's exterior walls, you must use an enclosed chute. In a building where even the second floor sits well above that threshold, an open drop simply isn't an option. EasyChute meets or exceeds applicable OSHA regulations, giving your crew and your GC documentation that the debris removal method is compliant.

If your project requires specific permits or has building-specific rules around exterior equipment, check with the Co-op City building management and the New York City Department of Buildings — requirements can vary by project scope and building.

Free Shipping to Co-op City Job Sites

EasyChute ships free to job sites anywhere in the United States, and that includes Co-op City addresses in the Bronx. Order online at fixed prices — no quotes, no negotiations. If you have questions before you order, call 855-902-4883 (Mon–Fri, 8 AM–10 PM Eastern) or email orders@easychute.com.

Browse the full lineup at the EasyChute shop, or read through our FAQ if you want more detail on sizing, setup, and how sections connect.

Other Bronx Neighborhoods We Ship To

Co-op City is one of many Bronx communities where contractors and property managers use EasyChute. We also ship regularly to job sites in the Bronx overall, Riverdale, Bedford Park, the Concourse area, and Morris Park. If you're working across multiple neighborhoods or boroughs, see how other contractors approach reusable chute setups for NYC renovations and multi-unit debris chute work.

Frequently asked questions

How many 50 ft sections do I need for a high-rise unit in Co-op City?

A 50 ft section covers roughly five stories. For a unit on the eighth floor, two 50 ft sections (about ten stories of reach) give you enough length to run from the window down to a ground-level dumpster with room to spare. Add a 25 ft or 10 ft section if you need to fine-tune the total length.

Can I hang an EasyChute from a window in a Co-op City high-rise?

Yes. EasyChute is designed to hang from a window, roof edge, scaffold, or fire escape using the four woven connection loops at the top of the first section. No outrigger frames or special rigging hardware is required. Always confirm with building management that exterior hanging is permitted before you set up.

Does EasyChute ship directly to my job site in Co-op City?

Yes. EasyChute ships free to job sites anywhere in the United States, including addresses in Co-op City and the rest of the Bronx. Order online at a fixed price and the chute ships to the address you provide.

What kind of construction debris can I drop through an EasyChute?

EasyChute is built for common renovation debris including drywall, plaster and lath, roofing shingles, wood scraps, and insulation. The chute is made of tear-resistant woven, coated poly fabric and is reusable across multiple jobs.

Is an enclosed chute legally required on a Co-op City renovation project?

OSHA 29 CFR 1926.252(a) requires an enclosed chute when material is dropped more than 20 feet to any point outside the exterior walls of a building — a threshold easily exceeded in Co-op City's towers. EasyChute meets or exceeds applicable OSHA regulations. For project-specific permit and building management requirements, check with the Co-op City property management office and the New York City Department of Buildings.

Trash Chute for Co-op City, the Bronx — Lightweight, OSHA-Compliant Debris Removal