Need a trash chute in Wyoming? Whether you're tearing off a roof in Cheyenne, gutting a commercial building in Casper, or remodeling a historic property in Laramie, EasyChute ships a lightweight, reusable debris chute directly to your job site — free. No freight broker, no warehouse pickup, no rental crew. Order online and the chute comes to you.
Wyoming job sites run the full spectrum: single-story ranch homes on wide lots, two- and three-story commercial blocks in downtown Casper and Cheyenne, older brick storefronts in Sheridan, and everything in between. A fabric trash chute keeps debris moving safely from the upper floors to a dumpster at grade, protects workers below, and keeps your site clean without a lot of extra equipment. This page covers how to choose the right EasyChute sections for Wyoming building heights, how to set up the system, and how the OSHA enclosed-chute rule applies to your work.
Trash chutes shipped free to Wyoming
Free shipping on every order. See the full shop.
Why Wyoming Crews Rely on a Fabric Trash Chute
Wyoming is a big, spread-out state, and contractors there often work long days moving between jobs. The last thing a crew needs is hauling debris down a ladder by hand, throwing it out a window into an uncontrolled pile, or renting a frame-and-hopper system that takes half a morning to assemble. A fabric debris chute solves all three problems at once.
EasyChute is made from woven, coated poly fabric — tear-resistant and built for real demolition debris: drywall, plaster and lath, roofing shingles, wood scraps, and insulation. The sections fold down small when the job is done. A 10 ft section weighs under 3 lbs and fits in a drawer or a small box. You load it in the truck alongside your other tools, not in a separate trailer.
Reusability is the other advantage. Buy the sections once, use them job after job in Gillette, Rock Springs, Jackson — wherever the next project takes you across Wyoming.
Choosing the Right Trash Chute Sections for Wyoming Buildings
Most of Wyoming's residential stock is one to two stories: single-family ranch homes, ramblers, and modest two-story houses built across the high plains and mountain valleys. Downtown cores in Cheyenne, Casper, and Laramie include two- to four-story commercial and mixed-use buildings. Matching your chute length to the building keeps the system taut, efficient, and OSHA-compliant.
- One-story residential (roughly 8–12 ft to eave): A single EasyChute Lite-Duty 10 ft Section ($99) reaches from roof edge to dumpster on most ranch homes. The lite-duty version handles lighter renovation debris perfectly.
- Two-story residential or a taller one-story commercial: One EasyChute Heavy-Duty 10 ft Section ($149) or two lite-duty sections linked together give you the reach you need. The heavy-duty section is the better call when debris volume is high.
- Two-and-a-half to three stories — downtown storefronts, older brick commercial blocks: The EasyChute 25 ft Section ($277) covers this range in a single piece, keeping connection points and dust leakage to a minimum.
- Four to five stories — larger commercial, multifamily, or mixed-use: The EasyChute 50 ft Section ($596) spans roughly five stories. For taller work, combine a 50 ft section with a 25 ft or 10 ft section using the four-loop connection system.
Each joint overlaps 1.5 ft and locks together with carabiners or quick-connects through the woven loops at the top and bottom of every section. That overlap keeps dust and fine debris inside the chute instead of spilling onto workers or passersby.
The OSHA 20-Foot Enclosed-Chute Rule and Your Wyoming Project
If you're dropping material more than 20 feet outside the exterior walls of a building, OSHA 29 CFR 1926.252(a) requires an enclosed chute. That rule applies on Wyoming job sites the same as everywhere in the country. EasyChute meets or exceeds applicable OSHA regulations, so using it on a two-story or taller project keeps you on the right side of the requirement without renting specialty equipment.
For work at heights below 20 feet, a chute is still the smart choice — it keeps the site organized, protects workers below, and speeds up cleanup — but the enclosed-chute rule is the hard line you need to plan around. If you have questions about local building department requirements or permit conditions specific to your Wyoming municipality, check directly with the relevant city or county office.
Working Through Wyoming's Climate
Wyoming is known for cold winters, high winds, and significant temperature swings across the seasons. On an active job site — whether it's a summer roofing tear-off in Cody or a fall renovation in Laramie — those conditions affect your work flow. Because EasyChute sections fold and store small, you can take them down at the end of the day or when winds pick up, then re-hang them in minutes the next morning. There's no bulky frame or anchored hopper to deal with in gusting weather.
Plan your drop zone to stay clear of high-wind exposure where possible, and use all four connection loops to anchor the top of the chute securely to a window frame, roof edge, scaffold, or fire escape. A standard 32-gallon commercial trash can with the bottom removed makes a solid hopper at the top of the chute and helps funnel debris in even when the crew is working fast.
How to Set Up EasyChute on a Wyoming Job Site
- Choose your anchor point. A window opening, roof edge, scaffold rail, or fire escape all work. The top section needs four secure tie-off points for the woven loops.
- Rig the hopper. Remove the bottom from a standard 32-gallon commercial trash can and set it in the window or over the edge. This funnels debris into the chute and keeps the opening stable.
- Hang the first section. Loop the top connection loops around your anchor and clip carabiners or quick-connects through them. The chute hangs freely; no outriggers or frames needed.
- Add sections as needed. Connect additional sections loop-to-loop with carabiners. Each joint overlaps 1.5 ft automatically. Use the middle shortening straps to fine-tune the length so the bottom of the chute sits just above the dumpster opening.
- Start debris flow. Feed roofing shingles, drywall, plaster, insulation, or wood scraps into the hopper. Debris travels down and into the dumpster. Keep workers clear of the drop zone on the ground.
- Break down at end of day. Unclip, fold each section, and store. The whole system packs small enough to go in a truck cab or tool bin.
Order a Trash Chute to Any Wyoming Job Site — Free Shipping
EasyChute ships free to job sites anywhere in Wyoming — Cheyenne, Casper, Laramie, Gillette, Rock Springs, Sheridan, Jackson, or a rural site miles from the nearest town. There's no freight surcharge for distance. Order online at fixed prices, and the chute ships directly to the address you specify.
Not sure which section fits your project? Browse the full lineup at our shop, check the FAQ for common setup questions, or reach us directly at our contact page. You can also call 855-902-4883 Monday through Friday, 8 AM to 10 PM Eastern, or email orders@easychute.com.
Contractors working across state lines can also explore our pages for neighboring regions — see trash chutes for West Virginia and Wisconsin job sites for more setup guidance by region.
Frequently asked questions
Does EasyChute ship to rural Wyoming job sites, or only to major cities?
EasyChute ships free to any job site address in Wyoming — Cheyenne, Casper, Laramie, Gillette, and rural locations alike. Just enter your job site address at checkout. There's no extra charge for distance.
How many 10 ft sections do I need for a two-story Wyoming house?
Two 10 ft sections typically cover a standard two-story residential building. Sections connect loop-to-loop with carabiners, and each joint overlaps 1.5 ft to contain debris. If you prefer fewer connections, the 25 ft section covers two and a half stories in a single piece.
Does the OSHA enclosed-chute rule apply on Wyoming job sites?
Yes. OSHA 29 CFR 1926.252(a) is a federal standard that applies on job sites across all states, including Wyoming. When material is dropped more than 20 feet outside a building's exterior walls, an enclosed chute is required. EasyChute meets or exceeds applicable OSHA regulations.
Can EasyChute handle roofing shingles and heavy demolition debris?
EasyChute is built for common construction and renovation debris including roofing shingles, drywall, plaster and lath, wood scraps, and insulation. The woven, coated poly fabric is tear-resistant. For high debris volume, the Heavy-Duty 10 ft Section or the 25 ft and 50 ft sections are the right choice.
How do I connect multiple EasyChute sections for a taller Wyoming building?
Each section has four woven connection loops at the top and four at the bottom. You connect sections loop-to-loop using carabiners or quick-connects. Every joint automatically overlaps 1.5 ft to keep dust and debris inside the chute. Use the middle shortening straps to dial in the final length.