Trash Chute Flushing Queens | Free Shipping

When you need a trash chute in Flushing, Queens, the neighborhood's density works against every slow or bulky solution. Flushing is one of the most built-up corners of Queens — a tight grid of walk-up apartment buildings, mixed-use structures, attached row houses, and older multi-family homes, many of them three to six stories tall with rear yards that barely leave room to turn around. Hauling demo debris down interior stairwells is slow, dirty, and hard on finished surfaces. EasyChute ships a lightweight, woven coated-poly fabric debris chute directly to your Flushing job site, free of charge, anywhere in the United States.

Our chutes hang from a window opening, a roof edge, a scaffold railing, or a fire escape — no outriggers, no rental frame, no extra crew. One person can carry a full-length section under one arm and have it hung and ready before the first load of drywall or shingles hits the hopper. That matters on a Flushing block where parking is limited, sidewalk space is spoken for, and the building next door is two feet away.

Trash chutes shipped free to Flushing

Free shipping on every order. See the full shop.

Roofers using EasyChute to drop shingles into a dumpster in Dorchester, Boston

Why Flushing Renovations Demand a Smarter Debris System

Flushing's building stock ranges from pre-war brick walk-ups near downtown to postwar brick attached houses and newer mixed-use construction closer to the commercial corridors. What most of these buildings share is limited access: narrow side lots, zero-clearance party walls, and stairways that were not designed for carrying contractor bags of plaster and lath. A chute that channels debris from an upper floor directly into a dumpster or roll-off on the street or in the rear yard solves all of that in one move.

Fire escapes are common on older Flushing apartment buildings, and EasyChute's four woven connection loops at the top of each section let you tie off to a fire-escape railing without any hardware beyond a carabiner or a quick-connect clip. The connection system is the same whether you're hanging from a window frame on the second floor or a roof edge on the sixth.

OSHA and the 20-Foot Rule

If debris is dropped more than 20 feet to any point outside the exterior walls of a building, OSHA 29 CFR 1926.252(a) requires an enclosed chute. In a five- or six-story Flushing walk-up, that threshold is crossed almost immediately once you're above the second floor. EasyChute meets or exceeds the applicable OSHA regulations, so you stay compliant without renting or fabricating a custom solution. Always confirm specific permit and safety requirements with the New York City Department of Buildings and your local building department before work begins.

Choosing the Right Section Length for Your Flushing Building

EasyChute sections are designed so the math is easy on-site:

10 ft section ≈ one story. The Lite-Duty 10 ft section ($99) handles light demo on a second-floor gut or a single-story rear addition. The Heavy-Duty 10 ft section ($149) is the better pick when roofing shingles or thick plaster are in the mix.
25 ft section ≈ two and a half stories. The 25 ft section ($277) covers the typical three-story attached house or the lower floors of an older walk-up. It weighs under 8 lbs and folds into a bag you can carry up a narrow stairwell.
50 ft section ≈ five stories. The 50 ft section ($596) reaches from the top floor of a five- or six-story building down to the sidewalk or rear yard in a single run. It weighs under 15 lbs.

Sections connect loop-to-loop with carabiners. Each joint overlaps 1.5 feet, keeping dust and debris contained inside the chute rather than spilling onto the fire escape or the neighboring building's wall. Middle shortening straps let you fine-tune the drop so the mouth of the chute sits cleanly over your dumpster.

Need a hopper at the top? A standard 32-gallon commercial trash can with the bottom removed drops right into the opening and gives your crew a large target to aim for — no funnel to buy, no fabrication needed.

What These Chutes Are Built to Handle

EasyChute is built for the debris that actually comes out of a Flushing renovation: drywall, plaster and lath from older interior walls, wood framing scraps, roofing shingles, and insulation. The tear-resistant woven coated-poly fabric stands up to job-after-job reuse, so a single chute investment travels with you from a Flushing kitchen gut to your next Queens project and beyond.

Because every section folds small — a 10 ft section fits in a drawer or a small box — storage between jobs is never an issue. You're not renting space in a yard to park a steel chute frame.

Free Shipping to Flushing, Queens

EasyChute ships every order free to job sites across New York City, including Flushing. Order online, and we ship from our facility in Saugus, MA directly to the address you provide — a crew member's home, the job site itself, or wherever is most convenient. There are no local pick-up arrangements and no delivery add-ons: the price you see in the shop is the total product cost, shipping included.

If you have questions before you order, call us at 855-902-4883 (Mon–Fri, 8 AM–10 PM Eastern) or email orders@easychute.com. Our FAQ page covers sizing, setup, and connection hardware in detail: visit the FAQ.

Other Queens Neighborhoods We Ship To

Working across multiple Queens job sites? We ship to every corner of the borough. See our neighborhood pages for Queens overall, Astoria, Corona, Elmhurst, and Forest Hills. You may also find our guides on debris chutes for multi-unit Queens buildings and reusable chutes for NYC renovations useful for planning your next project.

Ready to Order?

Pick the section that matches your building height, add it to your cart, and ship it free to your Flushing job site. Browse all EasyChute sections in the shop.

Frequently asked questions

Can I hang an EasyChute from a fire escape on a Flushing walk-up?

Yes. Each section has four woven connection loops at the top that attach to a fire-escape railing with a carabiner or quick-connect clip — no drilling, no brackets. Always confirm that your building permit and NYC Department of Buildings requirements allow fire-escape attachment before you set up.

Which section length is right for a four-story building in Flushing?

A 25 ft section (roughly two and a half stories) combined with a 10 ft section will cover a four-story drop with room to adjust. Alternatively, the 50 ft section gives you a single continuous run from the roof to the street with length to spare using the middle shortening straps.

Does EasyChute meet OSHA requirements for debris drops in New York City?

EasyChute meets or exceeds applicable OSHA regulations, including 29 CFR 1926.252(a), which requires an enclosed chute when material is dropped more than 20 feet outside a building's exterior walls. Check with the NYC Department of Buildings and your local building department for any additional site-specific requirements.

How much does it cost to ship an EasyChute to a Flushing, Queens job site?

Shipping is free on every order, with no minimums and no add-on fees. The price listed for each section in the shop is the complete cost you pay.

Can I reuse the chute on multiple Flushing jobs?

Absolutely. EasyChute sections are designed for repeated reuse across multiple projects. The tear-resistant woven coated-poly fabric holds up to regular job-site use, and each section folds small enough to store in a truck bed or a small closet between jobs.

Trash Chute Flushing Queens: The Right Setup for Dense Urban Renovations