Trash Chute Corona Queens

When you're pulling a gut renovation in Corona, Queens, getting debris out of the building is half the battle. The neighborhood is packed with attached row houses, two- and three-story brick walk-ups, and mixed-use buildings where the sidewalk is narrow, the rear yard is small, and a full dumpster placement can mean a permit, a negotiation, or just plain no room. A trash chute for Corona, Queens lets you drop roofing shingles, drywall, plaster, and wood scraps straight from the work floor into a waiting bin — no bucket brigades, no debris elevator, no crew injury risk from carrying heavy loads down four flights of stairs.

EasyChute makes a lightweight, reusable debris chute from woven, coated poly fabric that ships free to your Corona job site from our Saugus, Massachusetts facility. The sections fold down small enough to fit in a drawer, yet each joint overlaps 1.5 feet to keep dust and debris contained all the way to the ground. Whether you're re-roofing a brick two-family or gutting a storefront apartment above a business on Roosevelt Avenue, there's a section length that fits your specific drop.

Trash chutes shipped free to Corona

Free shipping on every order. See the full shop.

EasyChute running from a third-floor window straight into a dumpster

Why Corona's Building Stock Makes a Debris Chute the Smart Call

Corona is one of Queens' most densely built neighborhoods. The housing stock tends toward attached two- and three-family brick homes, older apartment buildings, and low-rise mixed-use structures — very few of which have a freight elevator or a dedicated debris shaft. That means renovation debris traditionally goes one of two ways: bucket-and-carry (slow, hard on workers, and a genuine injury risk) or out a window in an uncontrolled toss (an OSHA violation when the drop exceeds 20 feet).

OSHA 29 CFR 1926.252(a) requires an enclosed chute any time material is dropped more than 20 feet outside the exterior walls of a building. A three-story Corona walk-up easily clears that threshold. EasyChute meets or exceeds applicable OSHA regulations, so you stay compliant and your crew stays safe.

Corona's lots are also tight. Many properties share a party wall on both sides, leaving only the front facade and a narrow rear passage as access points. That's exactly where a hang-and-drop chute shines — it requires no outriggers, no scaffold frame, no rental hoist, and no dedicated crew. One or two workers hang the top section from a window frame or roof edge, connect additional sections loop-to-loop with carabiners, and the chute is ready to work.

How to Set Up an EasyChute on a Corona Walk-Up

Choose your anchor point. A rear or front window opening, a roof edge, or a fire escape landing all work. The four woven loops at the top of the first section give you multiple tie-off options.
Make a hopper. Remove the bottom from a standard 32-gallon commercial trash can and set it in the window opening as a funnel. This keeps loose debris from bouncing off the sill.
Connect your sections. Each section has four loops at the top and four at the bottom. Link them loop-to-loop with carabiners or quick-connects. The 1.5-foot overlap at every joint keeps dust inside the chute rather than billowing onto the street or neighboring property — important in a dense block.
Use the shortening straps. Middle shortening straps let you fine-tune the length so the bottom of the chute drops neatly into your dumpster or debris bin, even if your bin isn't positioned at the exact distance you planned.
Feed debris steadily. Don't overload any single section. Feed drywall, shingles, plaster lath, and wood scraps at a manageable pace. The 22-inch diameter handles standard renovation debris comfortably.
Break down and reuse. When the job is done, disconnect the carabiners, fold each section, and pack them up for the next job. Lightweight and reusable job after job.

Picking the Right Section Length for Your Drop

EasyChute sections are sized to match common building heights, which makes choosing straightforward for most Corona jobs.

10 ft Section (≈ one story): Useful for low single-story additions, rear extensions, or to add length to an existing run. The Lite-Duty 10 ft section is $99 and weighs under 3 lbs. For heavier demolition debris like brick or thick plaster, step up to the Heavy-Duty 10 ft section at $149.
25 ft Section (≈ two and a half stories): The right fit for most two- and three-family homes in Corona. The 25 ft section is $277 and weighs under 8 lbs — one person can carry it up the stairs without breaking a sweat.
50 ft Section (≈ five stories): Built for taller apartment or mixed-use buildings. At under 15 lbs, the 50 ft section ($596) covers a full five-story drop in a single piece. You can also combine a 25 ft and a 10 ft section to hit an in-between height.

Sections connect to each other, so you can build exactly the drop you need and add a section if a future job runs taller.

Free Shipping to Corona, Queens Job Sites

Every EasyChute order ships free to job sites anywhere in the United States — including addresses in Corona, Jackson Heights, Elmhurst, and everywhere else across Queens. You order online at a fixed price, and the chute comes to your door. There are no quotes to request, no back-and-forth. Just pick the section that matches your drop, check out, and plan your setup.

If you have questions before ordering, call us at 855-902-4883 Monday through Friday, 8 AM to 10 PM Eastern, or email orders@easychute.com. We're happy to help you figure out which section length makes sense for the building you're working on.

More Queens and NYC Resources

EasyChute ships debris chutes to job sites across the borough and the metro area. If you're working in other parts of Queens or nearby neighborhoods, these pages may be useful:

Ready to order? Browse all EasyChute sections and get free shipping straight to your Corona job site.

Frequently asked questions

Can I hang an EasyChute from a fire escape on a Corona walk-up?

Yes. The four woven loops at the top of each section give you flexible anchor points, and a fire escape landing is a common and practical spot. Make sure your anchor is secure and that the chute clears the sidewalk or yard below. Check with your local building department if you have questions about fire escape use during construction in New York City.

What section length should I order for a three-story brick two-family in Corona?

A 25 ft section (roughly two and a half stories) covers most three-story walk-ups comfortably, especially if the bin sits at ground level directly below the window. If your drop is longer — say, from a rear roof to an alley — consider adding a 10 ft section to extend the run. Sections connect loop-to-loop with carabiners.

Does EasyChute comply with OSHA requirements for dropping debris in New York?

EasyChute meets or exceeds applicable OSHA regulations. OSHA 29 CFR 1926.252(a) requires an enclosed chute when material is dropped more than 20 feet outside a building's exterior walls. The overlapping joints on EasyChute sections keep debris enclosed through the entire drop.

How does free shipping work for a Corona, Queens address?

EasyChute offers free shipping on every order to any address in the United States, including job sites in Queens. You place your order online at the listed price — there are no additional shipping fees at checkout. Questions? Call 855-902-4883 or email orders@easychute.com.

Can I reuse the chute on multiple jobs in Corona or elsewhere in Queens?

Absolutely. EasyChute sections are built to be reused job after job. When you're done, disconnect the sections, fold them down — a 10 ft section fits in a drawer or small box — and store them until the next project. The lightweight design makes them easy to transport between job sites.

Trash Chute for Corona, Queens Renovations