When you're hauling out drywall, old shingles, or plaster on a Tennessee job site, tossing debris out a window and hoping for the best isn't an option — it's a safety and liability problem. A trash chute for Tennessee crews is the straightforward fix: hang it from a window or roof edge, drop debris straight into a dumpster below, and keep your site clean and your workers safe. EasyChute ships our woven, coated poly fabric debris chutes free to job sites anywhere in Tennessee, from Nashville and Memphis to Knoxville, Chattanooga, and every small town in between.
EasyChute was built by contractors who understood what a real job site needs — something lightweight, easy to set up without a rental crew, and tough enough to handle the rough stuff job after job. Our chutes fold down small enough to ride in the back of your truck and connect together in minutes. Whether you're stripping a historic home in East Nashville, re-roofing a commercial building in Memphis, or gutting a Knoxville rental unit, the right section length is ready to ship directly to your site.
Trash chutes shipped free to Tennessee
Free shipping on every order. See the full shop.
Why Tennessee Crews Rely on a Fabric Debris Chute
Tennessee's building stock runs the full range. Nashville has been one of the most active renovation markets in the South, with crews working through older brick bungalows, postwar ranch homes, and new mid-rise construction in neighborhoods that have changed fast. Memphis holds some of the region's oldest housing stock — shotgun houses, craftsman bungalows, and vintage commercial buildings downtown that regularly need gut renovations. Knoxville and Chattanooga each have their share of historic homes, older apartment buildings, and university-area housing that sees constant turnover and rehab work.
In all of those settings, debris handling is a daily challenge. A fabric trash chute lets one or two workers drop material from upper floors directly into a dumpster or trailer at ground level — no relay lines, no wheelbarrows bouncing down stairs, no debris landing in a pile that someone has to move twice. That's time and labor saved on every job.
Tennessee's climate adds another layer of urgency. Summers across the state are hot and humid, which means your crew wants to move efficiently and spend as little extra time hauling debris as possible. Spring storm season can roll in quickly, so having a setup that goes up and comes down fast matters. An EasyChute debris chute weighs under 15 lbs even in the 50 ft section and folds into a compact bundle — it travels light and sets up without any outriggers, frames, or special equipment.
OSHA's Enclosed Chute Rule and What It Means on Tennessee Sites
Federal OSHA regulations apply on construction sites across Tennessee, and one rule every contractor should know is 29 CFR 1926.252(a): when material is dropped more than 20 feet to any point outside the exterior walls of a building, the drop must happen inside an enclosed chute. That applies whether you're working in a suburb of Nashville or on a rural jobsite in the hills of East Tennessee.
EasyChute meets or exceeds that OSHA requirement. The 22-inch diameter barrel and the 1.5-foot overlap at every section joint keep dust and debris contained as material travels down. You're not just keeping the site tidier — you're keeping your crew in compliance. If you have questions about how local building departments interpret debris management or staging areas on a specific Tennessee project, always check directly with the relevant municipal or county office, since requirements can vary.
Choosing the Right Chute Length for Tennessee Buildings
Matching your chute to the building height is simple. Each 10 ft section covers roughly one story, so a two-story home needs about 20 ft of chute, and a three-story building needs 30 ft. Here's how the EasyChute lineup maps to common Tennessee project types:
- Single-story work or topping off a longer run: The EasyChute Lite-Duty 10 ft Section ($99) handles lighter renovation debris and is an easy add-on to any existing setup.
- Two- and three-story homes: Pick up two or three EasyChute Heavy-Duty 10 ft Sections ($149 each) for roofing, drywall, and plaster work — these handle the heavier loads that come with a full gut renovation.
- Low-rise apartment buildings and commercial work up to two and a half stories: The EasyChute 25 ft Section ($277) covers that range in a single, quick-to-hang piece that weighs under 8 lbs.
- Taller buildings — four to five stories and up: The EasyChute 50 ft Section ($596) handles the height and weighs under 15 lbs. For buildings taller than five stories, combine sections using the carabiner loop system.
Sections connect loop-to-loop — four loops at the top of each section, four at the bottom — and every joint overlaps 1.5 feet so nothing leaks out at the seams. Middle shortening straps let you dial in the exact length you need without improvising.
Setting Up Your Chute on a Tennessee Job Site
Getting an EasyChute running takes a few minutes, not a few hours. Here's the basic process:
- Choose your hang point. A window opening, roof edge, scaffold rail, or fire escape all work. No outriggers or rental equipment needed.
- Secure the top section. Loop the top connection loops over your anchor point or tie them off to your scaffold. The four-loop design distributes load evenly.
- Add sections if needed. Connect additional sections loop-to-loop with carabiners or quick-connects, letting each joint overlap the full 1.5 feet.
- Set up a hopper. A standard 32-gallon commercial trash can with the bottom removed fits right over the top of the chute opening and gives workers a wide target to drop debris into.
- Position your container below. A dumpster, trailer, or debris box directly under the chute exit catches everything cleanly.
- Start dropping debris. Drywall, shingles, lath, insulation, wood scraps — all common Tennessee renovation debris types move through without issue.
When the job is done, the whole setup folds down small. A 10 ft section fits in a drawer or a small box. Pack it up, bring it to the next job, and use it again.
Order Your Trash Chute and Get Free Shipping to Tennessee
Every EasyChute order ships free to any address in the United States — that includes job sites in Nashville, Memphis, Knoxville, Chattanooga, Clarksville, Murfreesboro, and anywhere else in Tennessee. You order at a fixed price online, and it ships directly to where you need it.
If you're working through a multi-phase project or managing several crews across the state, it's worth ordering the section lengths that match your most common building heights and keeping them in your truck. The low weight and compact fold mean storage is never a problem.
Browse the full lineup at our shop, or reach us by phone at 855-902-4883 (Mon–Fri, 8 AM–10 PM Eastern) or by email at orders@easychute.com. You can also visit our FAQ page for common questions about setup and section selection, or contact us directly if you need help choosing the right configuration for your Tennessee project.
Working in a neighboring state on your next job? Check out our pages for Texas and South Carolina for region-specific guidance, or see our Nashville debris chute safety guide for more detail on urban renovation work.
Frequently asked questions
Does EasyChute ship trash chutes to Tennessee job sites?
Yes — EasyChute ships free to any job site anywhere in the United States, including every city and county in Tennessee. You order online at a fixed price and the chute ships directly to your location. There are no freight charges added at checkout.
Which chute section is right for a two-story home renovation in Tennessee?
A two-story home typically needs about 20 feet of chute. Two Heavy-Duty 10 ft sections connected together cover that comfortably and handle the heavier debris loads — like old shingles or plaster — common in Tennessee gut renovations. If you need a little extra length for the ground-level drop into a dumpster, a third section gives you room to spare.
Does Tennessee require an enclosed chute for debris drops?
Federal OSHA regulation 29 CFR 1926.252(a) requires an enclosed chute when material is dropped more than 20 feet outside a building's exterior walls — and that rule applies on Tennessee construction sites. EasyChute meets or exceeds that requirement. For any local permit or staging rules specific to your Tennessee municipality or county, check with the relevant building department directly.
Can I connect multiple EasyChute sections for a taller Tennessee building?
Absolutely. Sections connect loop-to-loop using carabiners or quick-connects, and every joint overlaps 1.5 feet to keep debris and dust contained. You can combine a 50 ft section with additional 10 ft sections to reach taller buildings, and the middle shortening straps let you fine-tune the total length on site.
How do I set up an EasyChute on a Tennessee roofing job?
Hang the top of the chute from the roof edge or a secure anchor point — no frames, outriggers, or rental crew needed. Place a 32-gallon commercial trash can with the bottom removed over the top opening to create a hopper for shingles and roofing scraps. Position a dumpster directly below the chute exit and you're ready to drop debris. The whole setup goes up and comes down in minutes.